Ft. Pierce, FL Mold Damage Remediation

With more than 200,000 residents in the city alone, emergencies and disasters stemming from mismanaged water damages or storm damages can occur frequently. We have mold remediation professionals educated in the latest practices for mold removal and damage repairs. Regardless of size, from single-family homes to Indian River State College and Fontenelle Plaza, we have practical removal experience to help with: 

  • Mold remediation
  • Black mold
  • Bathroom mold removal
  • Mold specialists
  • Attic mold

How Common is Attic Mold for Ft. Pierce Homes?

Bouts of severe weather are not uncommon in a coastal community, and these situations can lead to damage and vulnerabilities in your home’s exterior. When water can penetrate attic spaces, the resulting persistent moisture can facilitate rapidly spreading mold growth. Often homeowners do not recognize these threats until black mold has migrated to higher traffic areas. Mold inspections can determine the extent of the damage and the appropriate actions our professionals must take to remove the organisms completely.  

Can SERVPRO Perform Black Mold Damage Repairs in Ft. Pierce?

With a mold remediation contractor license (MRSR2994), we can provide repair and build-back for structurally compromised homes and businesses. Controlled demolition is typically needed to fully eradicate active colonization, which leads to a need for material replacement and reconstruction. Our license also permits us to address structural vulnerabilities that might allow recurrences of mold damage.

For more on mold remediation and black mold damage repairs, click here.

SERVPRO of Port St. Lucie NE

If You See Signs of Mold, Call Us Today – (772) 266-2350

Understanding Mold

Confusion and misunderstanding surround the topic of mold and mold remediation. Some restoration businesses even make claims to remove all mold from a building. This is a fallacy. Mold spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return. 
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

Faster to Any Size Fire Disaster

A minor mold problem can quickly become a major infestation if left untreated. We can start the remediation process immediately after you contact us. A faster response lessens the mold damage, limits additional damage, and reduces the remediation cost.

Locally Owned, with National Resources

We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of Port St. Lucie NE is close by and ready to respond to your mold damage emergency. We are proud to be an active member of the Ft. Pierce community and want to pitch in and help make our community the best it can be.

We proudly serve Port St. Lucie, FL, Ft. Pierce, FL, St. Lucie West, FL, and surrounding areas.

Highly Trained Water and Mold Restoration Specialists

As water and mold damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our water and mold training and certificates.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

Step 1: Emergency Contact - (772) 266-2350

The mold cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.

Step 2: Inspection and Mold Damage Assessment

We determine the scope of the mold damage by carefully inspecting your property for visible signs of mold. Since mold can be hidden, we use various technologies to detect mold and hidden water sources. 

Step 3: Mold Containment

Our professionals use various containment procedures to prevent the spread of mold. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mold.

Step 4: Air Filtration

Our specialized filtration equipment allows our professionals to capture microscopic mold spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process. 

Step 5: Removing Mold and Mold-Infested Materials

Depending on the amount of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In general, we’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.

Step 6: Cleaning Contents and Sanitizing

SERVPRO of Port St. Lucie NE will use a variety of cleaning techniques and products to clean your furnishings and personal belongings. Since mold infestations also cause a persistent musty odor, our professionals are also trained to remove odors and provide deodorization using fogging equipment.

Step 7: Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

SERVPRO knows Mold

In Ft. Pierce, FL, SERVPRO of Port St. Lucie NE is ready to tackle and resolve any mold issues that arise. SERVPRO professionals understand the anxiety that can happen when a homeowner uncovers mold. Let us help put your worries to rest. Our knowledgeable crew is ready with the gear needed to tackle any mold job. Reach us at (772) 266-2350 - We’re ready to activate our team to remediate your mold.